2006
John A. Barnard
Butera, A., Gomez, J., Barnard, J.A., and Weston J.L., “Magnetic Anisotropy in Fe81Ga19/MgO (100) films sputtered at different powers”, Physica B 384, 262-264 (2006).
Li, Fang-I, Thaler, Sean M., Leo, Perry H., and Barnard, John A., “Dendrimer pattern formation in evaporating drops”, J. Phys. Chem. B 110, 25838-25843 (2006)
Sung kwon cho
Jewart, C., McMillen, B., Cho, S. K., and Chen, K. P., “X-Probe Flow Sensor Using Self-Powered Active Fiber Bragg Gratings,” Sensors and Actuators A, Vol. 127, pp. 63-68, (2006).
Park, Ho Il, Mushtaq, Usman, Perello, David, Lee, Innam, Cho, Sung Kwon, and Yun, Minhee, “Effective and Low-Cost Platinum Electrodes for Microbial Fuel Cells Deposited by Electron Beam Evaporation,” Energy and Fuels (revised).
Zhao, Y. and Cho, S. K., “Microparticle Sampling by Electrowetting-Actuated Droplet Sweeping,” Lab on a Chip, Vol. 6, pp. 137-144, (2006).
Minking K. Chyu
Cunha, F.J. and Chyu, M.K., “Trailing-Edge Cooling for Gas Turbines,” Invited Review Paper, AIAA J. Propulsion and Power, Vol. 22, No. 2, 2006, pp.286-300.
Cunha, F.J., Dahmer, M.T. and Chyu, M.K., “Thermal-Mechanical Life Prediction System for Anisotropic Turbine Components,” ASME J. Turbomachinery, Vol. 128, Issue 2, 2006, pp. 240-250.
Cunha, F.J., Dahmer, M.T. and Chyu, M.K., “Analysis of Airfoil Trailing Edge Heat Transfer and Its Significance in Thermal-Mechanical Design and Durability,” ASME J. Turbomachinery, Vol. 128, Issue 4, 2006, pp. 738-746
Li, P.W., Chen, S.P., and Chyu, M.K., “To Achieve the Best Performance through Optimization of Gas Delivery and Current Collection in Solid Oxide Fuel Cells,” ASME J. Fuel Cell Science and Technology, Vol. 3, Issue 2, 2006, pp. 188-194.
Shih, T. I-P. and Chyu, M.K., “Introduction: Turbine Sciences and Technology,” AIAA J. Propulsion and Power, Vol. 22, No. 2, 2006, p.225
Uysal, U., Li, P-W., Chyu, M.K., and Cunha, F.J., “Heat Transfer on Internal Surfaces of a Duct Subjected to Impingement of a Jet Array with Varying jet Hole-Size and Spacing,” ASME J. Turbomachinery, Vol. 128, No. 1, 2006, pp. 158-165.
William W. Clark
Corr, L. R. and Clark, W. W., “Similarities Between Mechanical Springs and Piezoceramic Switching Shunts,” AIAA Journal, Vol. 44, No. 11, pp. 2797-2800, November (2006).
Mo, C., R. Wright, Slaughter, W. S. and Clark, W. W., “Behavior of a Unimorph Circular Piezoelectric Actuator,” Journal of Smart Materials and Structures, Vol. 15, pp. 1094-1102, (2006).
Daniel G. Cole
Ardelean, E. V., McEver, M. A., Cole, D. G., and Clark , R. L., "Active Flutter Control of a Typical Section Model with a V-stack Piezoelectric Flap Actuator," AIAA J. of Aircraft, 43(2), 482–486, (2006).
Johannes, M.S., Kuniholm, J.F., Cole, D.G., and Clark, R.L., "Automated CAD/CAM Based Nanolithography Using a Custom Atomic Force Microscope." IEEE Transactions on Automation Science and Engineering, 3(3): 236-240, (2006).
Wulff, K. D., Cole, D. G., Clark, R. L., DiLeonardo, R., Leach, J., Cooper, J., Gibson, G. and Padgett, M. J., "Aberration correction in holographic optical tweezers", Optics Express, 14(9), 4169-4174, 2006.
Anthony J. DeArdo
Al-Hajeri, K. F., Garcia, C. I., Hua, M. and DeArdo, A. J., “Particle-stimulated Nucleation of Ferrite in Heavy Steel Sections,” ISIJ International, Vol. 46 No. 8, pp1233- 1240, (2006).
Kang, Heejae, Garcia, C. Isaac,Chin, Kwanggeun and Deardo, Anthony J., “Effect of Aluminum Content on the Mechanical Properties of Dual Stabilized Ti-Nb Interstitial Free High Strength Steel (IF-HSS),” ISIJ International, Vol. 47 (2007) No. 3, pp. 486-492.
Wang, R., Garcia, C. I., Hua, M., Cho, K., Zhang, H., and Deardo, A. J., “Microstructure and Precipitation Behavior of Nb, Ti Complex Microalloyed Steel Produced by Compact Strip Processing,” ISIJ International, Vol. 46 (2006) No. 9, p.1345.
Giovanni P. Galdi
Farwig, R, Galdi, G.P., and Sohr, H., Very Weak Solutions and Large Uniqueness Classes of Stationary Navier-Stokes Equations in R2, J. Diff. Equations 227 (2), 564-580 (2006).
Farwig, R., Galdi, G.P., and Sohr, H., Very Weak Solutions of Stationary and Nonstationary Navier-Stokes Equations with Nonhomogeneous Data, J. Math. Fluid Mech., 8 (3) 423-44 (2006).
Galdi, G.P, and Silvestre, A.L., Existence of Time-Periodic Solutions to the Navier-Stokes Equations Around a Moving Body, Pacific J. Math., 223 (2), 251-267 (2006).
Galdi, G.P., Determining Modes, Nodes and Volume Elements for Stationary Solutions of the Navier-Stokes Equations Past a Three-Dimensional Body, Arch. Ration. Mech. Anal, 180 (1), 97-126 (2006).
Galdi, G.P., and Silvestre, A., On the Steady Motion of a Navier-Stokes Liquid Around a Rigid Body, Arch. Rational Mech. Anal., published on line, November (2006).
Galdi, G.P, and Heuveline, V., Lift and Sedimentation of Particles in the Flow of a Viscoelastic Liquid in a Channel, Free and Moving Boundaries Analysis, Simulation and Control, R. Glowinski and P. Zolesio Eds25-58, CRC Publ. (2006).
C. Isaac Garcia
Al-Hajeri, K. F., Garcia, C. I., Hua, M. and DeArdo, A. J., “Particle-stimulated Nucleation of Ferrite in Heavy Steel Sections,” ISIJ International, Vol. 46 No. 8, pp1233- 1240, (2006).
Kang, Heejae, Garcia, C. Isaac,Chin, Kwanggeun and Deardo, Anthony J., “Effect of Aluminum Content on the Mechanical Properties of Dual Stabilized Ti-Nb Interstitial Free High Strength Steel (IF-HSS),” ISIJ International, Vol. 47 (2007) No. 3, pp. 486-492.
Wang, R., Garcia, C. I., Hua, M., Cho, K., Zhang, H., and Deardo, A. J., “Microstructure and Precipitation Behavior of Nb, Ti Complex Microalloyed Steel Produced by Compact Strip Processing,” ISIJ International, Vol. 46 (2006) No. 9, p.1345.
Peyman Givi
Givi, P., ``Filtered Density Function for Subgrid Scale Modeling of Turbulent Combustion,'' AIAA Journal, 44(1), 16--23 (2006).
Madnia, C.K., Jaberi, F.A and Givi, P., ``Large Eddy Simulation of Heat and Mass Transport in Turbulent Flows,'' Chapter 5 in Handbook of Numerical Heat Transfer, pp. 67--189, Second Edition, Editor: W.J. Minkowycz, E.M. Sparrow, and J.Y.\ Murthy, John Wiley & Sons, Inc., New York, NY (2006)
Jennifer Gray
Gray, J. L., Hull, R. J., and Floro, A., Periodic arrays of epitaxial self-assembled SiGe quantum dot molecules grown on patterned Si substrates, J. Appl. Phys. 100, 084312 (2006).
Leite, M. S., Gray, J. L., Hull, R., J. Floro, A., Magalhaes-Paniago, R., and Medeiros-Ribeiro, G., X-ray diffraction mapping of strain fields and chemical composition of SiGe: Si(001) quantum dot molecules, Phys. Rev. B 73, 121308 (2006).
Mingjian Hua
Al-Hajeri, K. F., Garcia, C. I., Hua, M. and DeArdo, A. J., “Particle-stimulated Nucleation of Ferrite in Heavy Steel Sections,” ISIJ International, Vol. 46 No. 8, pp1233- 1240, (2006).
John P. Leonard
Brayfield, Candace A., Marra, Kacey G., Leonard, John P., Stauffer, William R., Cui, X. Tracy, and Gerlach, Jörg C., Excimer Laser Channel Creation in Polyethersulfone Hollow Fibers For Compartmentalized In Vitro Neuronal Cell Culture Scaffolds
Leonard, J.P., "Determination of the absolute fluence profile in pulsed laser processing using melt-induced phase changes in an amorphous silicon thin film", Review of Scientific Instruments, Vol. 77, a.153101 (2006).
Shin, B., Leonard, J.P., McCamy, J.W., and Aziz, M.J. , “On the phase shift of reflection high energy electron diffraction intensity oscillations during Ge(001) homoepitaxy by molecular beam epitaxy”, Applied Surface Science, (2006).
Scott X. Mao
Jiang, C. B, Wu, B., Lu, L., Li, S. X. and Mao, S. X., “Lithium fluoride nanowires via vapor-liquid-solid growth”, Appl. Phys. Lett. 88, 093103 (2006).
Wang, H., and Mao, Scott X., “Nanoindentation-Induced Disappearance of a Room-Temperature Coulomb Blockade in Single-Walled Carbon Nanotubes”, Small, Vol 2, P 59-61(2006).
Wang, H., Zhao, M. and Mao, S. X., “Radial moduli of individual single-walled carbon nanotubes with and without electric current flow”, Appl. Phys. Lett. 89, 1 (2006).
Wu, F., Zhang, Z., Peker, A., Mao, S.X., Das, J. and Eckert, J., Strength sysmmetry of dendrites reinforced Zr- and Ti-based composites“, J. Mater. Res., Vol.21, No.9, p.2331(2006).
Xu, J., Wu, N., Jiang, C., Zhao, M., Li, J., Wei, Y. and Mao, Scott X., “AC Impedance Characterization of ZnO Nanobelt/Pd Schottky Contact in Ammonia”, Small, Vol.12, No.12, p1458 (2006).
Yang, J.S., Mao, Scott X., Yan, K. and Soh, A.-K., “Size effect on the electromechanical coupling factor of a thin piezoelectric film due to a nonlocal polarization law”, Scripta Materialia, Vol. 54 p.1281-1286,(2006).
Gerald H. Meier
Birks, N., Meier, G. H., and Pettit, F. S., Introduction to High Temperature Oxidation of Metals, 2nd Edition, Cambridge University Press, Cambridge, (2006).
Stiger, M. J., Meier, G. H., Pettit, F. S., Ma, Q., Beuth, J. L., and Lance, M. J., “Accelerated Cyclic Oxidation Testing Protocols for Thermal Barrier Coatings and Alumina-forming Alloys and Coatings”, Materials and Corrosion, 57, 1 (2006).
Yanar, N. M., Pettit, F. S., and Meier, G. H., “Failure Characteristics During Cyclic Oxidation of Yttria Stabilized Zirconia Thermal Barrier Coatings Deposited via Electron Beam Physical Vapor Deposition on Platinum Aluminide and on NiCoCrAlY Bond Coats with Processing Modifications for Improved Performances”, Metallurgical and Materials Trans. A, 37A, 1563 (2006).
Ian Nettleship
Dengiz, O., Chen, T., Nettleship, I. and Smith, A.E.,“The Effect of Powder Forming Method on the Pull-Out Flaw populations Observed on Polished Surfaces of Alumina Ceramics,” Mat. Sci. & Eng. A, A427 160-166 (2006).
Dengiz, O., Smith, A.E. and Nettleship, I., “Two-Stage Data Mining for Flaw Identification in Ceramic Manufacture,” International Journal of Production Research, 44 2839-2851 (2006).
Kumar, K., McAfee, R.J., Nettleship, I., and Slaughter, W.S., "A Representative Volume Element for the Densification of Powders,” J. Am. Ceram. Soc., 89 2311-2313 (2006).
McAfee, R.J., and Nettleship, I., “Effect of Slip Dispersion on Microstructure Evolution During Isothermal Sintering of Cast Alumina,” J. Am. Ceram. Soc., 89 1273-1279 (2006).
Frederick S. Pettit
Yanar, N. M., Pettit, F. S., and Meier, G. H., “Failure Characteristics During Cyclic Oxidation of Yttria Stabilized Zirconia Thermal Barrier Coatings Deposited via Electron Beam Physical Vapor Deposition on Platinum Aluminide and on NiCoCrAlY Bond Coats with Processing Modifications for Improved Performances”, Metallurgical and Materials Trans. A, 37A, 1563 (2006).
Laura Schaefer
Lu, Y., and Schaefer, L., “Numerical Study of a Flat-Tube High Power Density Solid Oxide Fuel Cell: Part II. Cell Performance and Stack Optimization,” Journal of Power Sources, vol. 153, no. 1, pp. 68-75(2006).
Yuan, P., and Schaefer, L., “Equations of State in a Lattice Boltzmann Model,” Physics of Fluids, vol. 18, no. 4, article 042101, (2006).
Yuan, P., and Schaefer, L., “A Thermal Lattice Boltzmann Two-Phase Flow Model and Its Application to Heat Transfer Problems - Part 1. Theoretical Foundation,” ASME Journal of Fluids Engineering, vol. 128, no. 1, pp. 142-150, (2006).
Yuan, P., and Schaefer, L., “A Thermal Lattice Boltzmann Two-Phase Flow Model and Its Application to Heat Transfer Problems - Part 2. Integration and Validation,” ASME Journal of Fluids Engineering, vol. 128, no. 1, pp. 151-156, (2006).
William S. Slaughter
De Vita, R. and Slaughter, W.S., A structural constitutive model for the strain rate-dependent behavior of anterior cruciate ligaments. Int. J. Solids Structures 43, 1561–1570. (2006).
Kumar, K., McAfee, R.J., Nettleship, I., and Slaughter, W.S., "A Representative Volume Element for the Densification of Powders,” J. Am. Ceram. Soc., 89 2311-2313 (2006).
Mo, C., R. Wright, Slaughter, W. S. and Clark, W. W., “Behavior of a Unimorph Circular Piezoelectric Actuator,” Journal of Smart Materials and Structures, Vol. 15, pp. 1094-1102, (2006).
Patrick Smolinski
Yang, Z. and Smolinski, P., “Finite Element Model for Poro-viscoelastic Dynamics of Biological Tissue” accepted for publication Computer Methods in Biomechanics and Biomedical Engineering, vol 9(1), 7-16 (2006).
Jeffrey S. Vipperman
Bisnette, Jesse, Smith, Adam K., Vipperman, J. S., and Budny, D. B., “Active Noise Control Using Phase-Compensated, Damped Resonant Filters,” ASME Journal of Vibration and Acoustics 128(2), pp. 148-55, April, (2006).
Li, Deyu and Vipperman, J. S., “Noise Control of Mock-Scale ChamberCore Payload Fairing Using Integrated Acoustic Resonators,” AIAA Journal of Spacecraft and Rockets, 43(4), (July-Aug, 2006).
James H-C Wang
Agarwal, C., Britton, Z.T., Alaseirlis, D.A., Li, Y., Wang, JH-C. Healing and normal fibroblasts exhibit differential proliferation, collagen production, ?-SMA Expression, and contraction.Ann Biomed Eng 34:653-659, (2006).
Chen, J., Iosifidis, M., Zhu, J., Tatarintsev, I., Wang, JH-C. Vanadate ingestion enhances the organization and collagen fibril diameters of rat healing medial collateral ligaments, Knee Surg Sports Traumatol Arthrosc 14(8):750-5, (2006).
Li, B., Chen, J., Wang, JH-C. RGD peptide-conjugated poly(dimethylsiloxane) promotes adhesion, proliferation, and collagen secretion of human fibroblasts. J Biomedical Materials Research 79 (4): 989-98, (2006).
Thampatty, B.P.; Im, H.J., Wang, JH-C. Leukotriene B4 at low dosage negates the catabolic effect of PGE2 in human patellar tendon fibroblasts. Gene 372:103-109, (2006).
Thampatty B.P., Wang JH-C. A new approach to study fibroblast migration. Cell Motility & Cytoskeleton 64 (1):1-5, (2006).
Wang, JH-C., Thampatty, B.P. An introductory review of cell mechanobiology (Review), Biomech Model Mechanobiol., 1-16, (2006).
Wang, JH-C., Iosifidis, M., Fu, F. Biomechanical basis of tendinopathy (Review), CORR, 443:320-332, (2006).
Wang, JH-C. Mechanobiology of tendon (invited review), J Biomech. 39:1563–1582, (2006).
Yang, Z.C., Chen, J.X., Lin, J-S., Wang, JH-C. Determining substrate displacement and cell traction fields - a new approach, J theor. Biology 242:607–616, (2006).
Qing-Ming Wang
Li, Fang, and Wang , Qing-Ming, “Array of dielectric nanocomposite devices using photo-epoxy Su-8 as the polymeric phase,” Appl. Phys. Lett. 89, 232905 (2006)
Yang, Zhaochun and Wang, Qing-Ming, “Transient response of piezoelectric thin-film vibration sensor under pulse excitation”, J. Appl. Phys. 99, 014107 (2006)
Zhang, Tao and Wang, Qing-Ming, “Performance of Miniaturized Direct Methanol Fuel Cell (DMFC) Devices Using Micropump for Fuel Delivery”, Journal of Power Sources, Volume 158, pp. 169-176. (2006)
Zhang, Tao, and Wang, ,Qing-Ming “Performance Evaluation of a Valveless Micropump Driven by Ring-Type Piezoelectric Actuator” IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol. 53, no. 2, pp.463-473 (2006)
Lisa Mauck Weiland
Mathews, Jessica L., Lada, Emily K., Weiland, Lisa M., Smith, Ralph C., and Leo, Donald J., “Monte Carlo Simulation of a Solvated Ionic Polymer with Cluster Morphology,” Smart Materials and Structures, 15: 187-199(2006).
Jorg. M. K. Wiezorek
Al-Ghaferi, Müllner, P., Heinrich, H., Kostorz, G. and Wiezorek, J.M.K.,“Elastic constants of equiatomic L10-ordered FePd single crystals”, Acta Materialia (2006) Vol. 54 (4) 881-889(2006).
Deshpande, A.R., Blachère, J.R. and Wiezorek, J.M.K., "Texture Evolution in Combined Reaction Transformed Equiatomic Ferromagnetic L10-ordered FePd Intermetallics", Scripta Materialia Vol. 54, 955-960 (2006).
Deshpande A.R., and Wiezorek, J.M.K., "Texture Evolution in equiaxed polycrystalline L1o-ordered FePd during Coarsening", INVITED, Contribution to Special Issue Honoring Prof. G. Kostorz on Occasion of his 65th Birthday, Zeitschrift für Metallkunde Vol. 97 (3) 304-309 (2006).
Savio L-Y. Woo
Darcy, S.P., Kilger, R.H.P., Woo, S.L-Y., Debski, R.E.: Estimation of ACL Forces by Reproducing Kinematics Between Sets of Knees: A Novel Non-Invasive Methodology. J. of Biomechanics, 39(13): 2371-2377, (2006).
Gilbert, T.W., Sacks, M.S., Grashow, J.S., Woo, S.L-Y., Badylak, S.F., Chancellor, M.B.: Fiber Kinematics of Small Intestinal Submucosa Under Biaxial and Uniaxial Tension. J. of Biomechanical Engineering, 128(6): 890-898, (2006).
Hsu, W.H., Fisk, J. A., Yamamoto, Y., Debski, R.E., Woo, S.L-Y.: Differences in Torsional Joint Stiffness of the Knee Between Genders - A Human Cadaveric Study. Am. J. of Sports Medicine, 34(5): 765-770, (2006).
Hunziker, E., Spector, M., Libera, J., Gertzman, A., Woo, S.L-Y., Ratcliffe, A., Lysaght, M., Coury, A., Kaplan, D., Vunjak-Novakovic, G.: Translation from Research to Applications in Tissue Engineering, 12(12):3341-3364, 2006
Kilger, H.P., Stehle, J., Fisk, J.A., Thomas, M., Miura, K. Woo, S.L-Y.: Anatomic Double Bundle Reconstruction for Valgus Knees: A Biomechanical Study. Am. J. of Sports Medicine, 34(6): 961-967, (2006).
Liang, R., Woo, S.L-Y., Takakura, Y., Moon, D.K., Jia, F., Abramowitch, S.D. The Long-Term Effects of Porcine Small Intestine Submucosa on the Healing of Medial Collateral Ligament: A Functional Tissue Engineering Study. J. of Orthopedic Research, 24(3): 811-819, (2006).
Miura, K., Woo, S.L-Y., Brinkley, R., Fu, Y.C., Noorani, S.: Effects of Knee Flexion Angles for Graft Fixation on Its Force Distribution in Double Bundle Anterior Cruciate Ligament Reconstruction. Am. J. of Sports Medicine, 34(4): 577-585, (2006).
Moon, D., Takakura, Y., Gabriel, M., Abramowitch, S., Woo, S.L-Y.: The Effects of Refreezing on the Viscoelastic and Tensile Properties of Ligaments. J. of Biomechanics, 39(6): 1153-1157, (2006).
Moon, D.K., Abramowitch, S.D., Woo, S.L-Y.: The Development and Validation of a Charge Coupled Device Laser Reflectance System to Measure the Complex Cross-Sectional Shape and Area of Soft Tissues. J. of Biomechanics, 39(16): 3071-3075, (2006).
Moore, S., Thomas, M., Woo, S.L-Y., Gabriel, M., Kilger, R., Debski, R.: A Novel Methodology to Reproduce Previously Recorded Six-Degree of Freedom Kinematics on the Same Diarthrodial Joint. J. of Biomechanics, 39(10): 1914-1923, (2006).
Pfaeffle, H.J., Fisher, K.J., Srinivasa, A., Manson, T., Woo, S.L-Y., Tomaino M.: A Model of Stress and Strain in the Interosseous Ligament of the Forearm: Based on a Fiber Network Theory. J. of Biomechanical Engineering, 128(5): 725-732, (2006).
Woo, S.L.-Y., Takakura, Y., Liang, R., Jia, F., Moon, D.K.: Treatment with Bioscaffold Enhances Fibril Morphology and the Collagen Composition of Healing Medial Collateral Ligament in Rabbits. Tissue Engineering, 12(1): 159-166, (2006).
Woo, S.L-Y., Karaoglu, S., and Dede, O.: Biyomekanigin OCB Rekonstruksiyonuna Katkilari: Derleme Yazisi. Acta Orthopaedica et Tramatologica Turcica, 40(1):94-100, (2006).
Woo, S.L-Y., Abramowitch, S., Kilger, R., and Liang, R.: Biomechanics of Knee Ligaments: Injury, Healing, and Repair, in J. of Biomechanics, London, United Kingdom 36(1):1-20, (2006).
Woo, S.L-Y., Moon, D., and Dede, O.: Basic Science of Ligaments and Tendons Related to Rehabilitation in Sports-Specific Rehabilitation. Ed. R. Donatelli, Churchill-Livingston (Elsevier), St. Louis, MO, Chapter 1, pp. 1-14, (2006).
Woo, S.L-Y., Wu, C., Dede, O., Vercillo, F., Noorani, S.: Biomechanics and Anterior Cruciate Ligament Reconstruction in J. of Orthopaedic Surgery and Research, vol. 1(1):119-127 (Chinese translation), vol. 1(1):31-39, (2006).
Yamamoto, Y., Hsu, W.H., Fisk, J.A., Van Scyoc, A.H., Miura, K., Woo, S.L-Y.: The Effect of the Iliotibial Band on Knee Biomechanics in Response to Rotary Loads. J. of Orthopedic Research, 24(5): 811-819, (2006).
Meltem Yanar
Yanar, N. M., Pettit, F. S., and Meier, G. H., “Failure Characteristics During Cyclic Oxidation of Yttria Stabilized Zirconia Thermal Barrier Coatings Deposited via Electron Beam Physical Vapor Deposition on Platinum Aluminide and on NiCoCrAlY Bond Coats with Processing Modifications for Improved Performances”, Metallurgical and Materials Trans. A, 37A, 1563 (2006).
Judith C. Yang
Han, Xuetian, McAfee, Rich, and Yang, Judith C., "Development of a Versatile Kinetic Monte Carlo Code to Simulate Physical Processes in Thin Film Nucleation and Growth", MMMS Vol.2 N0.4 (October 2006).
Kisa, Maja, Li , Long, Yang, Judith, Minton, Timothy K., Stratton, William G., Voyles, Paul, Chen, Xidong, Van Benthem, Klaus and Pennycook, Steve J., “Homogeneous Silica Formed by the Oxidation of Si(100) in Hyperthermal Atomic Oxygen”, Journal of Spacecraft and Rockets, 43(2), pp 431-435 (2006).
Menard, L. D., Xu, F. R., Nuzzo, G., and Yang, J. C., “Preparation of TiO2-suupported Au nanoparticle catalysts from a Au13 cluster precursor: Ligand removal using ozone exposure versus a rapid thermal treatment”, J. Catal. 243, 64-73 (2006).
Menard, Laurent D., Xu, Huiping, Gao, Shang-Peng, Twesten , Ray D., Harper, Amanda S., Song, Yang, Wang, Gangli, Douglas Alicia D., Yang, Judith C., Frenkel, Anatoly I., Murray, Royce W., and Nuzzo, Ralph G., “Metal Core Bonding Motifs of Monodisperse Icosahedral Au13 and Larger Au Monolayer-Protected Clusters As Revealed by X-ray Absorption Spectroscopy and Transmission Electron Microscopy”, Journal of Physical Chemistry B, 10,14564-14573, (2006).
Menard, Laurent D., Gao, Shang-Peng, Xu, Huiping, Twesten, Ray D., Harper, Amanda S., Song, Yang, Wang, Gangli, Douglas, Alicia D., Yang, Judith C., Frenkel, Anatoly I., Nuzzo, Ralph G., and Murray, Royce W., “Sub-Nanometer Au Monolayer-Protected Clusters Exhibiting Molecule-like Electronic Behavior: Quantitative High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy and Electrochemical Characterization of Clusters”, Journal of Physical Chemistry B, 26, 07110 (2006).
Wang, L., Zhou, G.W., Eastman, J.A., and Yang, J.C., “Initial oxidation kinetics and energetics of Cu0.5Au0.5(001) film investigated by in situ UHV-TEM”, Surface Science, 600, 2372 (2006).
Zhou, G.W., Wang, L., Birtcher, R.C., Baldo, P.M., Pearson, J.E., Yang, J.C., and Eastman, J.A., "Cu2O island shape transition during Cu-Au oxidation”, Physical Review Letters, 96, 226108 (2006).
