Research Publications 2003

John A. Barnard

F.T. Xu, S.C. Street, and J.A. Barnard, "Coverage dependent evolution of two-dimensional dendrimer/mica domain patterns", J. Phys. Chem. B 107, 12762-12767 (2003).

G. Wei, J. Gong, G. Zangari, M.L. Weaver, and J.A. Barnard, "Thin CNx overcoats deposited using various sputtering gases", J. Appl. Phys. 93, 8710-8712 (2003).

F.T. Xu, S.C. Street, and J.A. Barnard, "Pattern formation in aerosol-deposited dendrimer films", Langmuir 19, 3066-3070 (2003).

M. Curry, D. Arrington, S.C. Street, F. Xu, and J.A. Barnard, "Kinetic energy influences on the growth mode of metal overlayers on dendrimer mediated substrates", J. Vac. Sci. Technol. A 21, 234-240 (2003).

Jean R. Blachere

J. R. Blachere, E. Schumann, G. H. Meier, and F. S. Pettit, "Textures of Alumina Scales on FeCrAl Alloys" Scripta Mater., 49, 909 (2003).

Sung Kwon Cho

S. K. Cho, H. Moon and C-J. Kim, “Creating, Transporting, Cutting and Merging of Liquid Droplets by Electrowetting-Based Actuation for Digital Microfluidic Circuits,” Journal of Microelectromechanical Systems, Vol. 12, No. 1, pp. 70-80, (2003).

S. K. Cho, H. Moon and C.-J. Kim, “Creating, Transporting, Cutting and Merging of Liquid Droplets by Electrowetting-Based Actuation for Digital Microfluidic Circuits”, Journal of Microelectromechanical Systems, Vol. 12, No. 1, pp. 70-80, (2003).

T. K. Hsiai, S. K. Cho, P. K. Wong, M. Ing, A. Salazar, A. Sevanian, M. Navab, L. L. Demer, and C. M. Ho, “Monocyte recruitment to endothelial cells in response to oscillatory shear stress”, The FASEB (The Federation of American Societies for Experimental Biology) Journal, Vol. 17, pp. 1648-1657, (2003).

T. K. Hsiai, S. K. Cho, P. K. Wong, M. Ing, A. Salazar, A. Sevanian, M. Navab, L. L. Demer and C. M. Ho, “Monocyte recruitment to endothelial cells in response to oscillatory shear stress,” The FASEB (The Federation of American Societies for Experimental Biology) Journal, Vol. 17, pp. 1648-1657, (2003).

Minking K. Chyu

P-W. Li and M. K. Chyu, “Simulation of the Chemical/electrochemical Reaction and heat/mass transfer for a tubular SOFC working in a stack”, J. Power Sources, 124, pp. 487-498, (2003).

P-W. Li, L. Schaefer, Q-M. Wang, T. Zhang and M. K. Chyu, “Multi-gas transportation and electrochemical performance of a polymer electrolyte fuel cell with complex flow channels”, Journal of Power Sources, Volume 115 (1), pp. 90-100, (2003).

P-W. Li, T. Zhang, Q-M. Wang, L. Schaefer and M. K. Chyu, “The performance of PEM fuel cells fed with oxygen through the free-convection mode”, Journal of Power Sources, Volume 114 (1), pp. 63-69, (2003).

William W. Clark

B. H. Campbell, W. W. Clark, and J. H-C. Wang, “A Multi-Station Culture Force Monitor System to Study Cellular Contractility”, Journal of Biomechanics, Vol. 36, No. 1, pp. 137-140, (2003).

L. R. Corr and W. W. Clark, “A Novel Semi-Active Multi-Modal Vibration Control Law for a Piezoceramic Spring”, ASME Transactions: Journal of Vibration and Acoustics, Vol. 125, April 2003, pp. 1-9.

A. J.Kurdilla W. W. Clark, W. Wang, D. E. McDaniel, “Stability of a Class of Real-Time Switched Piezoelectric Shunts”, Journal of Intelligent Material Systems and Structures, Vol. 13, No. 2, pp. 107-116, (2003).

M. Muriuki and W. W. Clark, “Modeling and Testing the Force-Generating Characteristics of Magnetorheological Dampers”, International Journal of Vehicle Design, Vol. 33, Nos. 1/2/3, pp. 171-188, (2003).

Anthony J. DeArdo

S. Yim, P. Wray, K. M. Tiitto, C. I. Garcia and A. J. DeArdo, "Effect of Chemical Composition and Thermomechanical Processing on Texture in Hot Bands of Ti and Ti+Nb Containing Ultra-Low Carbon Steels," ISIJ International, Vol. 43, No. 10, (2003), pp.1615-1621.

C. I. Garcia, M. J. Hua, M. K. Miller and A. J. DeArdo, "Application of Grain Boundary Engineering in Lead-Free 'Green Steel'," ISIJ International, Vol. 43, No. 12, (2003), pp.2023-2027.

A. J. DeArdo, "New Challenges in the Thermomechanical Processing of HSLA Steels," Materials Science Forum, Vol. 426-432, Part I, (2003), pp.49-56.

A. J. DeArdo, "Niobium in Modern Steels," International Materials Reviews, Vol. 48, No. 6, (2003), pp.371-402.

Pradeep P. Fulay

"The Science and Engineering of Materials", Fourth Edition, Don Askeland and Pradeep Phulé, (Publisher Brooks Cole, 2003).

Giovanni P. Galdi

G. P. Galdi, “Steady Flow of a Navier-Stokes Fluid around a Rotating Obstacle”, J. Elasticity, 71, pp. 1-31, (2003).

G. P. Galdi, H. Sohr, “Existence and Uniqueness of Physically Reasonable Time-Periodic Navier-Stokes Flow around an Obstacle”, Arch. Rational Mech. Anal. (2003).

C. Isaac Garcia

C. I. Garcia, M. J. Hua, M. K. Miller and A. J. DeArdo, "Application of Grain Boundary Engineering in Lead-Free 'Green Steel'," ISIJ International, Vol. 43, No. 12, (2003), pp.2023-2027.

Peyman Givi

M. R. H. Sheikhi, T. G. Drozda, P. Givi and S. B. Pope, “Velocity-Scalar Filtered Density Function for Large Eddy Simulation of Turbulent Flows”, Physics of Fluids, 15(6), pp. 2321-2337, (2003).

Mingjian Hua

C. I. Garcia, M. J. Hua, M. K. Miller and A. J. DeArdo, "Application of Grain Boundary Engineering in Lead-Free 'Green Steel'," ISIJ International, Vol. 43, No. 12, (2003), pp.2023-2027.

Scott X. Mao

Z. Chen, N. Wu, J. Singh, S X. Mao, “Effect of Al2O3 Overlay on hot-corrosion behavior of yttria-stabilized zirconia coating in molten sulfate-vanadate salt”, Solid Thin Film, 443, pp. 46-52, (2003).

B. M. Ennis, A. Madan, S. A. Barnett and S. X. Mao, “Super hardening and deformability in epitaxially grown W/NbN nanolayers under shallow and deep nanoindentations”, J. Applied Physics Vol. 94, No.11, pp. 1-7, (2003).

B. M. Ennis, A. Madan, W. S. Slaughter, S. A. Barnett, and S. X. Mao, “Super hardening and deformability in epitaxially grown W/NbN nanolayers under shallow and deep nanoindentations”, J. Appl. Phys., 94, pp. 6892–6898, (2003).

S. X. Mao, M. Zhao, Z. L. Wang,"Nanoscale mechanical behavior of individual semiconducting nanobelts", Applied Physics Letters, 83, pp. 993-995, (2003).

S. X. Mao, N. A. McMinn, and N. Q. Wu, “Processing and mechanical behavior of TiAl/NiAl intermetallic composites produced by cryogenic mechanical alloying”, Materials Science & Engineering, A363, pp. 275-289 (2003).

M. Zhao, W. Slaughter, M. Li and S. X. Mao, “Material-Length-Scale-Controlled Nanoindentation Size Effects due to Strain-Gradient Plasticity”, Acta Materialia, Vol.51, pp. 4461-4469, (2003).

M. H. Zhao, W. S. Slaughter, M. Li, and S. X. Mao, “Material-length-scale-controlled nanoindentation size effects due to strain-gradient plasticity”, Acta Mater., 51, pp. 4461–4469, (2003).

Gerald H. Meier

N. M. Yanar, F. S. Pettit, and G. H. Meier, "Effects of Bond Coat Processing on the Durability of Thermal Barrier Coatings", Materials Science Forum, 426-432, 2453, (2003).

J. R. Blachere, E. Schumann, G. H. Meier, and F. S. Pettit, "Textures of Alumina Scales on FeCrAl Alloys" Scripta Mater., 49, 909 (2003).

M. C. Maris-Sida, G. H. Meier, and F. S. Pettit, "Some Water Vapor Effects during the Oxidation of Alloys that are a-Al2O3 Formers", Metallurgical and Materials Trans. A, 34A, 2609 (2003).

K. Onal, M. C. Maris-Sida, G. H. Meier, and F. S. Pettit, "Water Vapor Effects on the Cyclic Oxidation Resistance of Alumina-Forming Alloys", Materials at High Temperatures, 20, 327 (2003).

N. M. Yanar, G. Kim, S. Hamano, F. S .Pettit, and G. H. Meier, "Microstructural Characterization of the Failures of Thermal Barrier Coatings on Ni-base Superalloys", Materials at High Temperatures, 20, 495 (2003).

Ian Nettleship

I. Nettleship, B.R. Patterson and W.S. Slaughter, "The Evolution of Average Microstructural Properties in Final Stage sintering of Alumina," J. Am. Ceram. Soc., 86 252-256 (2003).

A. Konak, S. Kulturel-Konak, A. E. Smith and I Nettleship, "Estimation of Shrinkage for Near Net-Shape Using a Neural Network Approach," J. Intelligent Manufacturing., 14 [2] 219-228 (2003).

I. Nettleship and R.J. McAfee, "Microstructural Pathways for the Densification of Slip Cast Alumina," Mat. Sci. & Eng. A., A352 287-93 (2003).

R.J. McAfee and I. Nettleship, "The Simulation and Selection of Shapes for the Unfolding of Grain Size Distribution," Acta Mater. 51, 4603-4610 (2003).

Frederick S. Pettit

N. M. Yanar, F. S. Pettit, and G. H. Meier, "Effects of Bond Coat Processing on the Durability of Thermal Barrier Coatings", Materials Science Forum, 426-432, 2453, (2003).

J. R. Blachere, E. Schumann, G. H. Meier, and F. S. Pettit, "Textures of Alumina Scales on FeCrAl Alloys" Scripta Mater., 49, 909 (2003).

M. C. Maris-Sida, G. H. Meier, and F. S. Pettit, "Some Water Vapor Effects during the Oxidation of Alloys that are a-Al2O3 Formers", Metallurgical and Materials Trans. A, 34A, 2609 (2003).

K. Onal, M. C. Maris-Sida, G. H. Meier, and F. S. Pettit, "Water Vapor Effects on the Cyclic Oxidation Resistance of Alumina-Forming Alloys", Materials at High Temperatures, 20, 327 (2003).

Donald J. Plazek

D.J. Plazek and C.A. Bero, "Precise glass temperatures", J. Phys.: Condens. Matter. 15, S789-S802 (2003).

Anne M. Robertson

B. J. Chung, A. M. Robertson and D. G. Peters, “The Numerical Design of a Parallel Plate Flow Chamber for Investigation of Endothelial Response to Shear Stress”, Computers and Structures, 81, pp. 535-546, (2003).

A. M. Robertson, “On the Attainability of Steady Viscometric Flows, Topics in Mathematical Fluid Mechanics”, Quaderni di Matematica, 10, pp. 219-245, (2003).

Laura Schaefer

William S. Slaughter

I. Nettleship, B. R. Patterson and W. S. Slaughter, “Evolution of average microstructural properties in the final stage sintering of alumina”, J. Am. Cer. Soc., 86, pp. 252–256, (2003).

X. G. Ning, M. R. Lovell, and W. S. Slaughter, “Two-dimensional anisotropic contact behavior of unidirectional FRP composites”, J. Tribol. 125, pp. 457–461, (2003).

W. Sun, M. S. Sacks, T. L. Sellaro, W. S. Slaughter and M. J. Scott, “Biaxial mechanical response of bioprosthetic heart valve biomaterials in high in-plane shear”, J. Biomech. Eng., 125, pp. 372–380, (2003).

M. Zhao, W. Slaughter, M. Li and S. X. Mao, “Material-Length-Scale-Controlled Nanoindentation Size Effects due to Strain-Gradient Plasticity”, Acta Materialia, Vol.51, pp. 4461-4469, (2003).

M. H. Zhao, W. S. Slaughter, M. Li, and S. X. Mao, “Material-length-scale-controlled nanoindentation size effects due to strain-gradient plasticity”, Acta Mater., 51, pp. 4461–4469, (2003).

Patrick Smolinski

E. Bono, P. Smolinski, A. Casagranda and J. Xu, “Three-Dimensional Trabecular Alignment Model, Computer Methods in Biomechanics and Biomedical Engineering”, Vol. 6 (2), pp. 125-131, (2003).

Jeffrey S. Vipperman

J. S. Vipperman, D. Li, I. Avdeev and S. Lane, “Investigation of the sound transmission into an advanced grid-stiffened structure”, ASME Journal of Vibration and Acoustics, 125(3), July 2003, pp. 257-66.

James H-C Wang

B. H. Campbell, W. W. Clark, and J. H-C. Wang, “A Multi-Station Culture Force Monitor System to Study Cellular Contractility”, Journal of Biomechanics, Vol. 36, No. 1, pp. 137-140, (2003).

Qing-Ming Wang

X-H. Du, Q-M. Wang, and K. Uchino, “Accurate Determination of Complex Materials coefficients of Piezoelectric Resonators”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 50(3), pp. 312-320, (2003).

Q-M. Wang, T. Zhang, Q. Chen and X-H. Du, “Effect of DC bias field on the complex materials coefficients of piezoelectric resonators”, Sensors and Actuators A: Physical, Vol. 109/1-2, pp. 149-155, (2003).

Jorg M.K. Wiezorek

J.M.K. Wiezorek, "Dislocation and Twin Interactions with Polytwin Interfaces in L10-ordered FePd", Intermetallics (2003) Vol.11 (1) 9-21.

S.X. Mao, X. Han and J.M. Wiezorek, "Fracture and cavitation in a constrained thin metal layer under a scale effect in layered materials", Philosophical Magazine (2003) Vol. 83, No. 15, 1807-1826.

A. Gupta and J.M.K. Wiezorek, "Microstructural evolution of PST-TiAl during low-rate micro-straining at 1023K in hard and soft orientations", Intermetallics (2003) Vol. 11 (6) 589-600.

H. Xu, H. Heinrich and J.M.K. Wiezorek, "Microstructural changes during annealing of FePd-based thin films", Intermetallics (2003) Vol. 11 (9) 963-969.

Judith C. Yang

J. C. Yang, S. Bradley, J. M. Gibson, "The Oblate Structure of PtRu5 Supported on Carbon Black", (2003) Materials Characterization, 51, p. 101-7.

G. Zhou and J. C. Yang, "Temperature effect on the Cu2O Oxide morphology created by oxidation of Cu(001) as investigated by In situ UHV TEM", (2003), Applied Surface Science, 210, p. 165-170.

G. Zhou and J. C. Yang, "Initial oxidation kinetics of Cu(110) investigated by in situ UHV-TEM", (2003), Surface Science, 531, p. 359-67.

G. Zhou and J. C. Yang, "Temperature effect on the Cu2O Oxide morphology created by oxidation of Cu(001) as investigated by In situ UHV TEM", (2003), Applied Surface Science, 210, p. 165-170.

G. Zhou and J. C. Yang, "Initial oxidation kinetics of Cu(110) investigated by in situ UHV-TEM", (2003), Surface Science, 531, p. 359-67.

L.Li and J. C. Yang, "Complex Oxide Structures Formed by Oxidation of Ag(100) and Ag(111) by Hyperthermal Atomic Oxygen ", (2003) Materials at High Temperature, 20, p. 601-6.

M. Randjelovic and J. C. Yang, "Structural Comparisons of Passivated Si(100) by Atomic And Molecular Oxygen ", (2003) Materials at High Temperature, 20, p. 281-286.

G. Zhou and J. C. Yang, " Self-assembly of metal-oxide nanostructures: Oxidation of Cu Films by In-situ UHV-TEM", (2003) Materials at High Temperature, 20, p. 247-252.

G. Zhou and J. C. Yang, "In situ UHV-TEM investigations of the kinetics of initial stages of oxidation on the roughened of Cu(110)", (2004), Surface Science, 559, p. 100-110.

Research Publications 2003

John A. Barnard

Jean R. Blachere

Sung Kwon Cho

Minking K. Chyu

William W. Clark

Anthony J. DeArdo

Pradeep P. Fulay

Giovanni P. Galdi

C. Isaac Garcia

Peyman Givi

Mingjian Hua

Scott X. Mao

Gerald H. Meier

Ian Nettleship

Frederick S. Pettit

Donald J. Plazek

Anne M. Robertson

Laura Schaefer

William S. Slaughter

Patrick Smolinski

Jeffrey S. Vipperman

James H-C Wang

Qing-Ming Wang

Jorg M.K. Wiezorek

Judith C. Yang

Research Facilities

Archives

Benedum Hall